Search

Helping You Protect Your Space with Fences and Gates

Three Ways To Minimize The Cost Of Installing A Residential Fence

26 October 2021

Ricardo Obrien

Installing a residential fence is essential for three primary purposes. These include:

• Establishing property boundaries
• Enhancing the security of your home
• Improving the curb appeal of your property

However, installing a residential fence can often be an expensive endeavor, especially when you factor in purchasing the fencing materials and hiring residential fence contractors. Additionally, you may be required to apply for a permit to install the residential fence in some cases.

As a result, many homeowners often get discouraged by the overall costs of installing a residential fence. Nonetheless, there are various ways to mitigate the costs of installing a residential fence. Therefore, if you want to save money on your residential fence installation, here are three ways you can save money on the project.

Cost Sharing With Neighbors

As mentioned earlier, one of the main reasons you need to erect a residential fence is to establish the property boundaries. Thus, because you share a property boundary with your immediate neighbors, it is highly advisable to approach them with the idea of cost-sharing the residential fence installation.

Excluding the side of a property that borders a road, on average, most residential properties are connected to other properties on the remaining sides. Thus, if you have a rectangular or square property, you should have at least two or three other homeowners with whom you can cost-share the residential fence installation costs.

By sharing the cost of erecting residential fences with your neighbors, you will end up spending significantly less money on the project as opposed to installing the entire perimeter residential fence on your own.

Avoid Permits

As earlier stated, you may require to apply for a permit to erect a residential fence in some specific scenarios. Typically, you need a permit to erect a residential fence if:

• You intend to erect a residential fence that is eight feet or higher. However, depending on where you live, some municipalities may require you to apply for a permit if the fence you want to erect is at least six feet high.
• You intend to construct a residential fence using masonry or concrete materials.
• You are constructing a fence near a street, wetland, slope, or environmentally protected area.

There are ways to work around the necessity for a permit. You can forego the costs associated with a fencing permit by constructing a residential fence that doesn't exceed the maximum allowed height set by your local municipality. Secondly, if you opt for fencing materials such as wood, PVC, wrought iron, chain link, etc., instead of masonry and concrete, you will not need to apply for a permit.

By forgoing the need for a permit, you get to avoid paying the permit fees, which in turn minimizes the total amount of money you spend on the residential fence installation project.

Consider Utilizing Cheap Fencing Materials

One of the main factors that determine how much you will spend on a residential fence is the cost of the fencing materials. There are several fencing materials that a homeowner can choose for their residential fencing project. However, some fencing materials such as wrought iron are far more expensive than chain link, PVC, vinyl, wood, barbed wire, etc.

By opting for cheaper fencing materials, it is pretty easy to mitigate the costs of erecting a residential fence. For instance, a chain link residential fence will cost you an average of $1-$6 per linear foot whereas, a wrought iron residential fence will cost you between $20 and $35 per linear foot.

Thus, from the above example, opting for a chain link residential fence will save you between $19 and $30 per linear foot on the purchasing price alone. For more information about residential fence installation, contact a fencing company in your area.

Share